2650 SERIES DRIVEN

Poly-Vee Tapered Sleeve Conveyor Roller

The 2650 is a poly-vee tapered sleeve roller with 9-V grooves. The poly-vee pulley is located at the head end of the roller which separates the drive area and conveying area. This prevents interference between the poly-vee blet and the conveyed goods. Each roller comes equipped with a polymer housed precision bearing, a polymer housing, and end cap seal.
  • Includes all the features of our 2250 Series roller with a tapered sleeve roller
  • Tapered sleeve is shockproof and abrasion-resistant
  • Light and easy to start up
  • Total of 9 grooves at 2.34mm pitch
  • Precision bearing design produces smooth and quiet operation
  • End cap design protects bearings from dust and liquids
  • Double spring retained axle rollers are standard on all daRoller rollers. Other options include internal thread or cotter pins.
  • Load capacity depends on drive capacity of the O-belt. Weight of single items to be conveyed should not exceed 66 lbs
  • Temperature range 23F to 104F
Diameter
Wall Thickness
Shaft
Bearings
Sleeve
1.96" (50mm) Zinc Plated
0.060" (1.5mm)
0.433" (11mm) Hex / 14mm Round
6002RZ ABEC-1 Green Cap - Greased
Plastic Taper
1.96" (50mm) Stainless
0.060" (1.5mm)
0.433" (11mm) Hex / 14mm Round
6002RZ ABEC-1 Green Cap - Greased
Plastic Taper