1200 SERIES GRAVITY

Precision Bearing Conveyor Roller

The 1200 Series gravity conveyor roller is suitable for many applications - mechanically driven, idler or gravity. Each roller comes equipped with a polymer housed precision bearing, end cap, spring-loaded shafts on both ends, and tube.
  • Double spring retained axle rollers are standard on all daRoller rollers. Other options include internal thread or pin retained.
  • Suited for general purpose applications
  • Precision bearing design allows smooth and quiet operation
  • Corrosion resistant galvanized tube. Stainless steel available as an option.
  • End cap design protects bearings from dust and liquids
  • With max speed up to 120 m/min, the 1200 Series roller is suitable for high speed applications.
  • Temperature range is -5C to +40C
Diameter
Wall Thickness
Shaft
Bearings
Covers
1.9" Galvanized
0.060"
7/16" Hex
6002RZ ABEC-1 Green Cap - Greased, 6002RZ ABEC-1 Green Cap - Oiled
Polyurethane 85A 1/8" (Orange/Black), PVC Gray
1.9" Stainless
0.060"
7/16" Hex
6002RZ ABEC-1 Green Cap - Greased, 6002RZ ABEC-1 Green Cap - Oiled
Polyurethane 85A 1/8" (Orange/Black), PVC Gray
1-3/8" Galvanized
0.048"
1/4" Round
6002RZ ABEC-1 Green Cap - Greased, 6002RZ ABEC-1 Green Cap - Oiled
Polyurethane 85A 1/8" (Orange/Black)
1-3/8" Galvanized
0.048"
5/16" Hex
6002RZ ABEC-1 Green Cap - Greased, 6002RZ ABEC-1 Green Cap - Oiled
Polyurethane 85A 1/8" (Orange/Black)
1.96" (50mm) Gray PVC
0.100" (2.5mm)
7/16" Hex
6002RZ ABEC-1 Green Cap - Greased, 6002RZ ABEC-1 Green Cap - Oiled
PVC Gray